Māori Tree Planter | Sculptural Five-Pocket Plant Display

Ready to use, install or paint. Your piece is 3D printed in your chosen filament colour and supplied unpainted. Enjoy it as it is or paint it to create your own finish.

Five planting pockets branch from a slender, carved tree form. Flowing scroll details and staggered heights turn small plants into a sculptural display.

At a glance

• Sizes: 3 standard sizes, see the dimensions below. Custom sizing is available by enquiry.
• Material: PETG, for aquarium and terrarium decor. Resists water and humidity; keep clear of direct contact with heat lamps and other heat sources.
• Floats: Printed PETG pieces can float because they contain air. For aquarium use, secure the base with aquarium-safe silicone or a suitable aquarium adhesive as described under “Good to know”.
• Safety: Choose dimensions, openings and a filament finish appropriate for your plants, fish, insects, reptiles or other animals. Check placement and condition before use.
• Finish: unpainted, in the colour and PETG finish of your choice. Painted effects shown in reference photos are not included.
• Made to order: ships within 7 business days.
• Free shipping: free delivery to Canada, the US and select European countries. Duties and import fees to the US are prepaid by us.

Colours

First choose a finish (Basic, Matte, Marble, Sparkly/Galaxy/Metallic or Glow-in-the-Dark), then pick a colour from that finish. Sparkly/Galaxy/Metallic includes our Galaxy, Sparkly and Metallic colours. There are 89 PETG colours in total, and the colour charts at the end of the photos show each one. Want something that is not listed? Contact us and we will try to source it.

Need a different size? The listed variants are convenient standard sizes, not the limits of what we can make. Many designs can be resized in width, height and depth, and their proportions can be adjusted to better fit your enclosure. Small dimensional changes often do not materially affect the price. Custom pricing depends on the finished dimensions and any separate printed sections required. Message Molten Modern with your enclosure dimensions for a custom quote.

Product details

• 3 supplied sizes, printed at their original model scales.
• 3D printed in PETG, unpainted, in one chosen filament colour.
• One complete two-part planter set per order.
• Plants, animals, substrate and other display accessories are not included.

Sizes

• Size 1: 12.8 × 6.7 × 18.7 cm
• Size 2: 19.1 × 10.0 × 28.0 cm
• Size 3: 25.3 × 13.3 × 37.2 cm

Approximate external width × depth × assembled height. All printed sections belonging to the selected size are included. The supplied files use nominal 20, 30 and 40 cm size labels; the measured assembled dimensions above are more precise. Planting pockets are smaller than the overall dimensions.

Colour and care

Choose from the PETG colour charts. Reference photos may show painted or weathered effects; the supplied product is unpainted and single-colour. Hand wash gently and keep away from direct heat. Position securely and protect moisture-sensitive surfaces when watering.

Good to know

• Anchoring in an aquarium: Bond the base to a flat stone or acrylic sheet with aquarium-safe silicone, or with hot glue or cyanoacrylate superglue specifically suitable for aquarium use. Follow the adhesive manufacturer’s surface preparation and full curing instructions before placing it in the aquarium. Do not drill through bowls, planting pockets, water reservoirs or other functional parts. If a separate nonfunctional enclosed air pocket can be safely identified underneath, small holes may allow water in and air out.

• Measure the inside of your enclosure before ordering, and leave a little room for installation.

Design licensed to Molten Modern by novYTerra.